Why Commercial Property Owners Choose Silicone Restoration
System Advantage
No Tear-Off Required
Avoid costly removal and disposal of existing roofing systems. Restore over approved substrates.
Performance Reliability
Withstands Ponding Water
Unlike many traditional systems, silicone maintains performance under standing water — ideal for flat commercial roofs common across Halifax.
Operational Continuity
Minimal Disruption
Quiet installation. No interior demolition. No major tear-off. Your facility can remain operational during the restoration process.
Cost Efficiency
Lower Cost Than Replacement
Silicone coating systems can significantly reduce capital expenditure compared to full roof replacement while delivering long-term waterproof protection.
Step 1: Commercial Roof Inspection
Comprehensive on-site evaluation including:
• Visual membrane assessment
• Seam and penetration review
• Drainage & ponding analysis
• Infrared moisture scan (where required)
This confirms roof eligibility for silicone restoration.
Progress 10%
Step 2: Adhesion Testing & Surface Preparation
Adhesion testing performed to confirm coating compatibility with existing substrate.
Roof surface is then pressure washed and prepared to ensure optimal bond performance.
Progress 30%
Step 3: Targeted Repairs & Detailing
Seams, penetrations, flashing, fasteners, and transition points are reinforced and repaired using compatible materials prior to coating application.
Progress 50%
Our Process
Step 4: Silicone Application & Quality Control
High-solids silicone coating applied at specified mil thickness to create a seamless waterproof membrane.
Wet mil gauges used during application to verify thickness and ensure system performance.
Progress 90%
Step 5: Final Verification & Warranty
Final inspection completed to confirm full coverage and specified mil thickness. Project documentation finalized and warranty issued. Your commercial roof is restored, protected, and back in service.
Progress 100%
Step 1: Commercial Roof Inspection
Comprehensive on-site evaluation including:
• Visual membrane assessment
• Seam and penetration review
• Drainage & ponding analysis
• Infrared moisture scan (where required)
This confirms roof eligibility for silicone restoration.
Progress 10%
Step 2: Adhesion Testing & Surface Preparation
Adhesion testing performed to confirm coating compatibility with existing substrate.
Roof surface is then pressure washed and prepared to ensure optimal bond performance.
Progress 30%
Step 3: Targeted Repairs & Detailing
Seams, penetrations, flashing, fasteners, and transition points are reinforced and repaired using compatible materials prior to coating application.
Progress 50%
Our Process
Step 4: Silicone Application & Quality Control
High-solids silicone coating applied at specified mil thickness to create a seamless waterproof membrane.
Wet mil gauges used during application to verify thickness and ensure system performance.
Progress 90%
Step 5: Final Verification & Warranty
Final inspection completed to confirm full coverage and specified mil thickness. Project documentation finalized and warranty issued. Your commercial roof is restored, protected, and back in service.
Progress 100%
Restore or Replace? Compare the Difference
Understanding the cost and operational impact of each option.
Silicone Restoration
Lower project cost
No tear-off required
Minimal operational disruption
Faster project completion
Reduced landfill waste
Seamless waterproof membrane
High reflectivity may reduce rooftop heat load
Potential reduction in HVAC cooling demand
Warranty-backed system
Generally 50-60% Cheaper
Full Roof Replacement
Higher capital expenditure
Complete tear-off of existing system
Greater operational disruption
Longer project timeline
Disposal and landfill impact
New membrane system installation
Typically dark membrane (higher heat absorption unless specified reflective)
Limited energy benefit unless upgraded system selected
Manufacturer-backed system warranty
Restore or Replace? Compare the Difference
Understanding the cost and operational impact of each option.
Silicone Restoration
Lower project cost
No tear-off required
Minimal operational disruption
Faster project completion
Reduced landfill waste
Seamless waterproof membrane
High reflectivity may reduce rooftop heat load
Potential reduction in HVAC cooling demand
Warranty-backed system
Generally 50-60% Cheaper
Full Roof Replacement
Higher capital expenditure
Complete tear-off of existing system
Greater operational disruption
Longer project timeline
Disposal and landfill impact
New membrane system installation
Typically dark membrane (higher heat absorption unless specified reflective)
Limited energy benefit unless upgraded system selected
Manufacturer-backed system warranty
Siliguard UltraSil 10
UltraSil 10 is a single-component, moisture-cured silicone coating engineered specifically for commercial flat roof restoration.
It forms a seamless, fully adhered waterproof membrane designed to extend roof life — without tear-off.
High-Solids Silicone Roof Restoration System
Permanent Ponding Water Resistance
Seamless
Waterproof
Membrane
High UV
& Weather
Stability
20+ Year
System
Performance
Built for Commercial Performance
20+ Year Service Life
>200% Elongation (moves with building expansion/contraction)
High Tensile Strength
Excellent UV Resistance
Permanent Ponding Water Resistance
Seamless Waterproof Barrier
Engineered for Harsh Roof Conditions
High & low temperature resistance
UV and weather stability
Chemical and pollutant resistance
Non-flammable system
Moisture-cured bonding technology
Installation Characteristics
Surface dry: ~30 minutes
Full cure: ~48 hours
Applied by roller or spray
Multi-layer reinforced system at seams & penetrations
Safety & Environmental Profile
Not classified as hazardous under GHS
Solvent-free formulation
Non-flammable when cured
Reduced landfill waste vs replacement
Downloads:
Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)
Siliguard UltraSil 10
UltraSil 10 is a single-component, moisture-cured silicone coating engineered specifically for commercial flat roof restoration.
It forms a seamless, fully adhered waterproof membrane designed to extend roof life — without tear-off.
High-Solids Silicone Roof Restoration System
Permanent
Ponding
Water
Resistance
Seamless
Waterproof
Membrane
High UV
& Weather
Stability
20+ Year
System
Performance
Built for Commercial Performance
20+ Year Service Life
>200% Elongation (moves with building expansion/contraction)
High Tensile Strength
Excellent UV Resistance
Permanent Ponding Water Resistance
Seamless Waterproof Barrier
Engineered for Harsh Roof Conditions
High & low temperature resistance
UV and weather stability
Chemical and pollutant resistance
Non-flammable system
Moisture-cured bonding technology
Installation Characteristics
Surface dry: ~30 minutes
Full cure: ~48 hours
Applied by roller or spray
Multi-layer reinforced system at seams & penetrations
Safety & Environmental Profile
Not classified as hazardous under GHS
Solvent-free formulation
Non-flammable when cured
Reduced landfill waste vs replacement
Downloads:
Technical Data Sheet (TDS)
Material Safety Data Sheet (MSDS)
Request a Commercial Roof Inspection
Extend the life of your existing roof system without disruptive tear-off.
Our team will evaluate your building, confirm system eligibility, and provide a clear restoration pathway — including cost comparison versus full replacement.
info@siliguard.ca
© Siliguard Inc. All Rights Reserved 2025.
Find an Installer
Privacy Policy
Terms & Conditions